A. R. Engineering has made its name as a qualified
Oil Regeneration Plant manufacturer/supplier from India. Economically available, our oil regeneration plants have been designed & developed in a manner which makes them user friendly, technically far ahead, orographic in nature and lastly & more importantly very cost effective as well. Further, these oil regeneration plants meet all the tough quality norms of international standard organization which makes them a best bet to go for.
The reclaimation of Transformer Oil is economically justifiable, cost effective and environmentally sound. The reclaimation is economically attractive because of increasing prices for both mineral and synthetic transformer coolants. The reclamation rejuvenates the transformer oil by eliminating contaminants formed due to entry of foreign particles, oxidation of oil and insulation deterioration, sludge formation, thermal cracking etc.
In our plants oil is reclaimed by heating, filtration, free moisture removal by coalescer filters, activated fuller's earth treatment and vacuum dehydration.
The plant will consist of mainly two sections:
- Fuller's earth treatment plant with free moisture separation facility
- Oil filtration and dehydration plant
Both the plants will be as per the schematic diagrams and technical specification sheets attached herewith.
The plant will be suitable for Oil treatment as described bellow:
Oil is taken into the raw oil storage tank with the help of vacuum. Then is allowed to settle in the tank and dirt, free water (if any) is drained out. Oil is sucked with the inlet pump. Then it is heated by passing through heater tank and then passed through spirafuge and coalescer filter to separate coarse contaminants and free moisture present in the oil.
After removal of free moisture oil is passed through the activated fuller's earth tank to remove acids and impurities such as breakdown products arising in the use of oil. Fuller's earth is used before vacuumtreatment to provide cleaner feed and to give an oil final polish.
Then this oil is passed through the fine filter and vacuum degassing and dehydration chamber to remove the maximum moisture and other contaminants to achieve required oil quality / parameters.
Arrangement can be made for acid and neutralization treatment in the raw oil storage tank.
One more blending tank can be provided for blending the oil for passivation.
In case you need any other treatment to be given to oil, we can offer you the plant with the same.
